Microcom 428TM Návod k obsluze

Procházejte online nebo si stáhněte Návod k obsluze pro Tisk a skenování Microcom 428TM. Microcom 428TM Operator`s manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 243
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1

MODEL 428TM DIRECT THERMAL PRINTER OPERATOR’S MANUAL PART NUMBER: 880042-0141 August 28, 2013 CPC Copyright

Strany 2

vi 428TM Operator’s Manual - 880042-0141 10.1 Maintenance Schedule...

Strany 3

Printer Commands Chapter 5 5-30 428TM Operator’s Manual - 880042-0141 that matches your network. One way would be to use the Device Installer

Strany 4

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-31 Se

Strany 5 - Table of Contents

Printer Commands Chapter 5 5-32 428TM Operator’s Manual - 880042-0141 Printer Model Dots/Inch D79 value 224 203 448 224 300 640 324M 203 6

Strany 6

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-33 This i

Strany 7

Printer Commands Chapter 5 5-34 428TM Operator’s Manual - 880042-0141 FLASH memory. This command is nonvolatile, so once the General Purpose

Strany 8

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-35 If an

Strany 9

Printer Commands Chapter 5 5-36 428TM Operator’s Manual - 880042-0141 3. The printer will report back the image size back to the Host as an in

Strany 10

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-37 X 161

Strany 11 - Introduction

Printer Commands Chapter 5 5-38 428TM Operator’s Manual - 880042-0141 the first backup position. If the printer powers on and does not de

Strany 12

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-39 repres

Strany 13 - 1.1 General Specifications

428TM Operator’s Manual - 880042-0141 vii Introduction The Model 428TM p

Strany 14 - 1.3 Media Specifications

Printer Commands Chapter 5 5-40 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND X 39 Auto-size: 0 Clears the use of auto-size value

Strany 15 -  Two-dimensional

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-41 ^A ^D

Strany 16 - 2.5 Options

Printer Commands Chapter 5 5-42 428TM Operator’s Manual - 880042-0141 3. After the ^D120 time delay, the printer advances the media until the

Strany 17

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-43 2. Th

Strany 18 - 3.2 Printer Power

Printer Commands Chapter 5 5-44 428TM Operator’s Manual - 880042-0141 command sets how far the media is moved back into the printer after the

Strany 19 - 3.4.1 USB Driver Setup

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-45 labels

Strany 20

Printer Commands Chapter 5 5-46 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND 81 Disable Serial Number Function: This command disable

Strany 21 - 3.6.1 Device Installer

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-47 20

Strany 22

Printer Commands Chapter 5 5-48 428TM Operator’s Manual - 880042-0141 3,300,300,7,1,5<CR> ^D56 <CR> ^D2 <CR>

Strany 23

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-49 2,300,

Strany 24

viii 428TM Operator’s Manual - 880042-0141

Strany 25

Printer Commands Chapter 5 5-50 428TM Operator’s Manual - 880042-0141 5.9.2.2 Kiosk Cutter Advance Distance Command This command sets the adv

Strany 26 - 3.8 AUX Option

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-51 Note:

Strany 27

Printer Commands Chapter 5 5-52 428TM Operator’s Manual - 880042-0141 operations. Most of the dispensing commands require that the printer is

Strany 28

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-53 2 Cle

Strany 29

Printer Commands Chapter 5 5-54 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND 100 Clear User RAM: This command clears all the downloa

Strany 30

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-55 This c

Strany 31

Printer Commands Chapter 5 5-56 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND xxyy 135 Save FONTS to FLASH. (See Chapter 7) This com

Strany 32

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-57 How to

Strany 33

Printer Commands Chapter 5 5-58 428TM Operator’s Manual - 880042-0141 Label FORMATS are saved into FLASH Slots 1 to 128. This command causes

Strany 34

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-59 5.13

Strany 35

428TM Operator’s Manual - 880042-0141 1-1 Chapter 1: Printer Specifications 1.1 General Specifications Width* 7.3” (185 mm) Height* 7.4” (

Strany 36

Printer Commands Chapter 5 5-60 428TM Operator’s Manual - 880042-0141 This command will move the motor in the reverse direction by the X amoun

Strany 37

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-61 7

Strany 38

Printer Commands Chapter 5 5-62 428TM Operator’s Manual - 880042-0141 Bit Position (12345678) Definition Operation 1 Reserved NA 2 Reserv

Strany 39

428TM Operator’s Manual - 880042-0141 6-1 Chapter 6: Downloadable Graphics The printer allows the user to download their own GRAPHICS and store t

Strany 40

Downloadable Graphics Chapter 6 6-2 428TM Operator’s Manual - 880042-0141 6.3.1 BMP2MIC.exe GRAPHIC Conversion Utility Procedure 1

Strany 41

Chapter 6 Downloadable Graphics 428TM Operator’s Manual - 880042-0141 6-3

Strany 42

Downloadable Graphics Chapter 6 6-4 428TM Operator’s Manual - 880042-0141 6.5.1 Save Compressed Graphics to RAM (D107) The followin

Strany 43 - 3.10 Loading Media

Chapter 6 Downloadable Graphics 428TM Operator’s Manual - 880042-0141 6-5

Strany 44

Downloadable Graphics Chapter 6 6-6 428TM Operator’s Manual - 880042-0141 8-bit data connections. This command is usable on data co

Strany 45 - 3.11.1 Print Button

Chapter 6 Downloadable Graphics 428TM Operator’s Manual - 880042-0141 6-7

Strany 46 - 3.12.2 Halted Mode: RED

Printer Specifications Chapter 1 1-2 428TM Operator’s Manual - 880042-0141 1.3 Media Specifications Media Types Continuous, die-

Strany 47 - 3.12.4 Diagnostic Mode

Downloadable Graphics Chapter 6 6-8 428TM Operator’s Manual - 880042-0141 6.7 Downloadable Graphics Commands The following commands

Strany 48 - 3.13 Printer Integration

428TM Operator’s Manual - 880042-0141 7-1 Chapter 7: Downloadable Fonts The printer allows the user to download their own fonts and s

Strany 49

Downloadable Fonts Chapter 7 7-2 428TM Operator’s Manual - 880042-0141 The following section details the process required to convert and downl

Strany 50

Chapter 7 Downloadable Fonts 428TM Operator’s Manual - 880042-0141 7-3 7.4.1.1 Save Compressed FONT to RAM (D127) The following is the format o

Strany 51

Downloadable Fonts Chapter 7 7-4 428TM Operator’s Manual - 880042-0141 The following is the format of the ^D104 command when used for a GRAPHI

Strany 52

Chapter 7 Downloadable Fonts 428TM Operator’s Manual - 880042-0141 7-5 beginning of the file. So the ^D135 command is never sent by itself, it’

Strany 53 - 3.14 TOF Sensor

Downloadable Fonts Chapter 7 7-6 428TM Operator’s Manual - 880042-0141 (Word is a 16-bit value, Byte is an 8-bit value, and Label is a locatio

Strany 54

Chapter 7 Downloadable Fonts 428TM Operator’s Manual - 880042-0141 7-7 ^A ^D COMMAND 100 Clear User RAM: This command clears all downloadable

Strany 55

Downloadable Fonts Chapter 7 7-8 428TM Operator’s Manual - 880042-0141

Strany 56 - Getting Started Chapter 3

428TM Operator’s Manual - 880042-0141 8-1 Chapter 8: Bar Codes The purpose of this chapter is to provide information pertaining to the unique requ

Strany 57 - 4.2 LDS Design Exercises

428TM Operator’s Manual - 880042-0141 2-1 Chapter 2: Features and Options 2.1 Fonts  7 (203 DPI) smooth bitmapped alpha-numeric fonts from 6pt

Strany 58 - 4.2.1 Format Creation

Bar Codes Chapter 8 8-2 428TM Operator’s Manual - 880042-0141 SYMBOLOGY DECODED NUMBER X1 X2 X3 X4 X5 0 NS X1 X2 0 0 0 0 0 X3 X4 X

Strany 59

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-3 spacing, Code39 will allow custom inter-character spacing as long as the maximum

Strany 60 - Corporation

Bar Codes Chapter 8 8-4 428TM Operator’s Manual - 880042-0141 8.1.11.1 GS1 Databar Omni-Directional The GS1 Databar Omni-Directional is used

Strany 61

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-5 Figure 8-4 GS1 Databar Stacked Omni-directional Sample 8.1.11.5 GS1 Databar

Strany 62 - 4.4.6 DPS (Print Speed)

Bar Codes Chapter 8 8-6 428TM Operator’s Manual - 880042-0141 Valid values for parameters Type of GS1 Databar barcode: 0 = Omni-directional 1

Strany 63

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-7 8.1.13 Postnet (ZIP+6), TCI 37 Postnet is a numeric-only symbology that is comm

Strany 64 - 4.4.9 SPG (Steps Past Gap)

Bar Codes Chapter 8 8-8 428TM Operator’s Manual - 880042-0141 [)>#1e01#dYYPPPPPPPPP#1dCCC#1dSSS#1dA..A#1dB..B#1dC..C#1e#04 Where: #1e is t

Strany 65

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-9 DATA STRING CONTROL CODE ASCII NAME HEX VALUE #00 Control @ NUL 00 #01 Co

Strany 66 - 4.5 Sample Header

Bar Codes Chapter 8 8-10 428TM Operator’s Manual - 880042-0141 compression, however it is not recommended. Please note that if a subset is fo

Strany 67

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-11 Subset A This subset contains 106 unique characters, which includes numbers 0 t

Strany 68 - 4.6.4 CC (Character Count)

Features and Options Chapter 2 2-2 428TM Operator’s Manual - 880042-0141 2.4 Special Features  USB 1.1  Easy print head cleaning  Tool

Strany 69

Bar Codes Chapter 8 8-12 428TM Operator’s Manual - 880042-0141 The following format is used to generate a PDF-417 bar code: ^D77<CR> :T

Strany 70 - 14pt ABCDEFGHIJKLMNOPQR

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-13 ECC# Number of Error Correction Codewords 0 2 1 4 2 8 3 16 4 32 5 64 6 1

Strany 71

Bar Codes Chapter 8 8-14 428TM Operator’s Manual - 880042-0141 Sample Format #2: ^D77<CR> :PDF-417 bar code data<CR> entere

Strany 72

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-15 The sample below shows how to generate a data matrix symbol: ^D164 <-------

Strany 73

Bar Codes Chapter 8 8-16 428TM Operator’s Manual - 880042-0141 Symbol Size Numeric Capacity Alphanumeric Capacity Binary Byte Capacity 26 x 26

Strany 74

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-17 T- Text Primarily Lowercase Alphanumeric 5.33 B- Base256 All byte values 0 –

Strany 75

Bar Codes Chapter 8 8-18 428TM Operator’s Manual - 880042-0141 Codeword Data and/or Function 1 - 128 ASCII data (ASCII value +1) 129 Pad Ch

Strany 76

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-19 ^D57 3,1280,900,,,10,0,1,250 1,300,300,1,47,0,,,10,10 <----------

Strany 77 - 4.8 Reverse Video

Bar Codes Chapter 8 8-20 428TM Operator’s Manual - 880042-0141 Figure 8-11 Intelligent Mail Barcode bars TYPE FIELD DIGITS E

Strany 78

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-21 Sequence Number The Sequence Number is a 9-digit field. For Destination Confirm

Strany 79 - Chapter 5 Printer Commands

428TM Operator’s Manual - 880042-0141 3-1 Chapter 3: Getting Started 3.1 Unpacking and Inspection The printer has been packaged in protecti

Strany 80

Bar Codes Chapter 8 8-22 428TM Operator’s Manual - 880042-0141 ^D176 Rotation Planet Code String EXAMPLE: ^D176 3 <-----------------------

Strany 81 - 5.1.1 Enquiry Responses

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-23 AI Content Format 11(*) Production Date (YYMMDD) n2+n6 13(*) Packaging Dat

Strany 82

Bar Codes Chapter 8 8-24 428TM Operator’s Manual - 880042-0141 AI Content Format 335(***) Gross Volume, Liters n4+n6 336(***) Gross Volum

Strany 83 - 5.2.1 Software Switches

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-25 AI Content Format 412 Purchase From (Location Code of Party from Whom Goods a

Strany 84

Bar Codes Chapter 8 8-26 428TM Operator’s Manual - 880042-0141 need not be the correct check digit). This character is used as a placeholder

Strany 85

Chapter 8 Bar Codes 428TM Operator’s Manual - 880042-0141 8-27 Figure 8-12 Bar Code Rotations 8.3 Bar Code Human Readable

Strany 86

Bar Codes Chapter 8 8-28 428TM Operator’s Manual - 880042-0141 The Text/Extended Bar TCI’s generate the human readable text and extended bars

Strany 87

428TM Operator’s Manual - 880042-0141 9-1 Chapter 9 Code Page Switching 9.1 What is Code Page Switching? There are 256 numeric codes used on the

Strany 88

Code Switching Chapter 9 9-2 428TM Operator’s Manual - 880042-0141 9.3.1 Code Pages The Default Code Page is selected when SW4 :( 5-8) =

Strany 89

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-3 The printer uses the “^” caret and “|” pipe characters as delimiters so

Strany 90

Getting Started Chapter 3 3-2 428TM Operator’s Manual - 880042-0141 Figure 3-2 Printer Rear Panel 3.2 Printer Pow

Strany 91

Code Switching Chapter 9 9-4 428TM Operator’s Manual - 880042-0141 9.3.3 860 Code Page The 860 Code Page is selected when SW4 :( 5-8) = 0

Strany 92

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-5 9.3.4 Spanish Code Page The Spanish Code Page is selected when SW4 :( 5

Strany 93

Code Switching Chapter 9 9-6 428TM Operator’s Manual - 880042-0141 Figure 9-5 Code Page - 850

Strany 94

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-7 9.3.6 German Code Page The German Code Page is selected when SW4 :( 5-8

Strany 95

Code Switching Chapter 9 9-8 428TM Operator’s Manual - 880042-0141 9.3.7 865 Code Page The 865 Code Page is selected when SW4 :( 5-8) = 0

Strany 96

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-9 9.3.8 Swiss Code Page The Swiss Code Page is selected when SW4 :( 5-8)

Strany 97

Code Switching Chapter 9 9-10 428TM Operator’s Manual - 880042-0141 Figure 9-9 Code Page - 852

Strany 98

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-11 9.3.10 French Code Page The French Code Page is selected when SW4 :( 5

Strany 99

Code Switching Chapter 9 9-12 428TM Operator’s Manual - 880042-0141 9.3.11 863 Code Page The 863 Code Page is selected when SW4 :( 5-8) =

Strany 100

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-13 9.3.12 Swedish Code Page The Swedish Code Page is selected when SW4 :(

Strany 101

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-3 3.3.1 RS-232 Serial Cables The printer uses a standard through serial cable,

Strany 102 - 5.3 General Purpose I/O

Code Switching Chapter 9 9-14 428TM Operator’s Manual - 880042-0141 Figure 9-13 Code Page - 437

Strany 103

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-15 9.3.14 Italian Code Page The Italian Code Page is selected when SW4 :(

Strany 104 - 5.4 Specialized Print Modes

Code Switching Chapter 9 9-16 428TM Operator’s Manual - 880042-0141 9.3.15 British Code Page The British Code Page is selected when SW4 :

Strany 105 - 5.4.2 USB Image Print Mode

Chapter 9 Code Page Switching 428TM Operator’s Manual - 880042-0141 9-17 9.3.16 USA Code Page The USA Code Page is selected when SW4 :( 5-8) =

Strany 106

Code Switching Chapter 9 9-18 428TM Operator’s Manual - 880042-0141

Strany 107

428TM Operator’s Manual - 880042-0141 10-1 Chapter 10 Printer Maintenance 10.1 Maintenance Schedule It is important to note that the optimum pri

Strany 108 - 5.4.6 Registration Commands

Printer Maintenance Chapter 10 10-2 428TM Operator’s Manual- 880042-0141 A thermal printer card is the quickest and easiest way to clean the p

Strany 109 - 5.4.7 Auto-size Commands

Chapter 10 Printer Maintenance 428TM Operator’s Manual - 880042-0141 10-3 4. Re-latch the printhead assembly, hold the printer, and slowly pull

Strany 110 - 5.4.8 AutoHeader Commands

Printer Maintenance Chapter 10 10-4 428TM Operator’s Manual- 880042-0141 Figure 10-4 Internal Cleaning 10.4 Print Hea

Strany 111 - 5.5.1 AutoLoad + Form Feed

Chapter 10 Printer Maintenance 428TM Operator’s Manual - 880042-0141 10-5 Figure 10-5 Cleaning the Print Head 10.5 Repl

Strany 113

Getting Started Chapter 3 3-4 428TM Operator’s Manual - 880042-0141 If there is an available Internet connection, Windows will silently connec

Strany 114 - 5.6 Printing Commands

Printer Maintenance Chapter 10 10-6 428TM Operator’s Manual- 880042-0141 2. Unscrew the Cutter or Tear Assembly using the mounting screw that

Strany 115

Chapter 10 Printer Maintenance 428TM Operator’s Manual - 880042-0141 10-7 5. Reattach the cutter or tear assembly taking care to locate the top

Strany 116

Printer Maintenance Chapter 10 10-8 428TM Operator’s Manual- 880042-0141 Figure 10-10 Narrow Media Light Spring Settin

Strany 117

428TM Operator’s Manual - 880042-0141 11-1 Chapter 11: Troubleshooting 11.1 Troubleshooting Tips The printer fails to turn “ON” and the status

Strany 118

Troubleshooting Chapter 11 11-2 428TM Operator’s Manual - 880042-0141 The status indicator light is solid amber in color:  Indicates that t

Strany 119 - 5.9.2 Kiosk Cutter Commands

428TM Operator’s Manual - 880042-0141 12-1 Index General Index ^D100 Cl

Strany 120

12-2 428TM Operator’s Manual - 880042-0141 ^D35 Adjust Contrast Window ...

Strany 121 - 5.9.4 Cutter Hold-off

428TM Operator’s Manual - 880042-0141 12-3

Strany 122 - 5.10.1 Tag/Tear Operation

12-4 428TM Operator’s Manual - 880042-0141 DOSCanadaF ...

Strany 123 - 5.12 Memory Commands

428TM Operator’s Manual - 880042-0141 12-5

Strany 124

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-5 3.5 Parallel Communication Interface The printer may be configured with a sta

Strany 125

12-6 428TM Operator’s Manual - 880042-0141 Reverse Video ...

Strany 126

428TM Operator’s Manual - 880042-0141 12-7

Strany 127

12-8 428TM Operator’s Manual - 880042-0141 Figure 9-1 Code Page - Default ...

Strany 128

428TM Operator’s Manual - 880042-0141 12-9

Strany 129 - 5.13 Printer Code Update

12-10 428TM Operator’s Manual - 880042-0141

Strany 130

428TM Operator’s Manual - 880042-0141 13-1 Appendix Appendix A: Limited Warranty Microcom Corporation printers, excluding thermal print heads

Strany 131

13-2 428TM Operator’s Manual - 880042-0141

Strany 132

428TM Operator’s Manual - 880042-0141 13-3 Appendix B: RMA Procedure Return Material Authorization (RMA) Procedure A Return Material Authoriza

Strany 133 - 6.2 RAM Data Types

13-4 428TM Operator’s Manual - 880042-0141

Strany 134

428TM Operator’s Manual - 880042-0141 13-5 Appendix C: ^D Command Summary 5 NULLS + 01: The 5 NULL method commands are a way to pass commands

Strany 135

Getting Started Chapter 3 3-6 428TM Operator’s Manual - 880042-0141 To change or configure the IP address, first click to highlight the XPOT-0

Strany 136

13-6 428TM Operator’s Manual - 880042-0141 provides a temporary switch into binary compression mode without having to have the printer configure

Strany 137

428TM Operator’s Manual - 880042-0141 13-7 ^AB ^D COMMAND 21 Software Bank Switch #1: A non-volatile command used to set the various functi

Strany 138

13-8 428TM Operator’s Manual - 880042-0141 ^AB ^D COMMAND 24 Software Bank Switch #4: A non-volatile command used to set the various function

Strany 139

428TM Operator’s Manual - 880042-0141 13-9 ^AB ^D COMMAND 26 Software Bank Switch #6: A non-volatile command used to set the various functions i

Strany 140

13-10 428TM Operator’s Manual - 880042-0141 ^AB ^D COMMAND 28 Software Bank Switch #8: A non-volatile command used to set the various functi

Strany 141 - 7.2 RAM Data Types

428TM Operator’s Manual - 880042-0141 13-11 ^A ^D COMMAND XX 42 Load Label Width in dots (LSX): The ^Axx specifies the value. XX 43 Load Lab

Strany 142 - 7.4 Font Download Methods

13-12 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND X 63 Text Mode Control: Allows the entry of new text without the ^D2 command and/o

Strany 143

428TM Operator’s Manual - 880042-0141 13-13 ^A ^D COMMAND 80 Clears Command 86, 88, and 89 81 Disable Serial Number Function: This command

Strany 144

13-14 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND X 94 Set Slice Buffer Size: Sets the size of the slice buffer memory that i

Strany 145 - 7.5 Font Structure

428TM Operator’s Manual - 880042-0141 13-15 ^A ^D COMMAND XX 102 Full Cut Interval: Instructs the printer when to issue a Full Cut. The default

Strany 146

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-7 The next screen prompts you to confirm your selection by pressing the Assign b

Strany 147

13-16 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND X 109 Serial Port Source (volatile) 0 RS-232 1 USB 2 Ethernet X 110 Gene

Strany 148

428TM Operator’s Manual - 880042-0141 13-17 ^A ^D COMMAND XX 120 AutoLoad Delay Selection: The AutoLoad Delay is the amount of time, in Millis

Strany 149 - Chapter 8: Bar Codes

13-18 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND xxyy 135 Save FONTS to FLASH: This command is used to save font’s into the print

Strany 150

428TM Operator’s Manual - 880042-0141 13-19 configuration stored in this location. The command may be sent along with the ^A1^D143 command

Strany 151

13-20 428TM Operator’s Manual - 880042-0141 ^A ^D COMMAND X 155 Set Feed Speed: Sets the feed speed used with the D153 and D154 commands. 0

Strany 152

428TM Operator’s Manual - 880042-0141 13-21 23 575 24 600 25 625 ^A ^D COMMAND X 158 Set the Transmissive Dot2Gap Value

Strany 153

13-22 428TM Operator’s Manual - 880042-0141

Strany 154

428TM Operator’s Manual - 880042-0141 13-23 Glossary Alphanumeric - A term used to identify characters consisting of letters, numbers, and other

Strany 155 - 8.1.14 MaxiCode, TCI 38

13-24 428TM Operator’s Manual - 880042-0141 DTR (Data Terminal Ready) - A status signal used to provide information about the status of the com

Strany 156

428TM Operator’s Manual - 880042-0141 13-25 RTS (Request To Send) - A status signal from the host PC (DTE) to the printer (DCE) indicating when the

Strany 157

Getting Started Chapter 3 3-8 428TM Operator’s Manual - 880042-0141 Turn the printer ON with the print button pressed and held in. Release th

Strany 158 - ABC#3012345#5abc

13-26 428TM Operator’s Manual - 880042-0141

Strany 159 - 8.1.19 PDF-417, TCI 46

428TM Operator’s Manual - 880042-0141 13-27 Appendix D: User Notes __________________________________________________________________________

Strany 160

13-28 428TM Operator’s Manual - 880042-0141

Strany 162 - 8.1.20 Datamatrix, TCI 47

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-9 Set the COM parameters up for 115200,n,8,1 and Hardware flow control and sele

Strany 163

Getting Started Chapter 3 3-10 428TM Operator’s Manual - 880042-0141 Pin 1 - DR1 Pin 3 - DR2 Pin 2 - DO 3.7 Cash Drawer Option The printer pr

Strany 164

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-11 Click the Next button to continue. You will see a screen similar to this

Strany 165

Getting Started Chapter 3 3-12 428TM Operator’s Manual - 880042-0141 Click “Continue Anyway” if this dialog box pops up. The next step i

Strany 166

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-13 Select the FINISH button to complete the installation process. The Micopti

Strany 167

Proprietary Statement This manual contains information proprietary to Microcom Corporation. This information is intended solely for the use of par

Strany 168

Getting Started Chapter 3 3-14 428TM Operator’s Manual - 880042-0141 This is a Micoptions configuration window sample.

Strany 169 - 8.1.22 Planet Code, TCI 49

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-15 The Form Setup may be used

Strany 170 - 8.1.23 UCC/EAN 128, TCI 50

Getting Started Chapter 3 3-16 428TM Operator’s Manual - 880042-0141 Select and send command

Strany 171

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-17 The Internal Parameters sec

Strany 172

Getting Started Chapter 3 3-18 428TM Operator’s Manual - 880042-0141 Product Printhead Width 203 or 300 dpi Dot2Gap Value 203 dpi 324M 640

Strany 173

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-19 You will also need to create form sizes that match the media you are using wi

Strany 174 - 8.2 Bar Code Rotation

Getting Started Chapter 3 3-20 428TM Operator’s Manual - 880042-0141 If we were printing any files they would be listed here. From the Prin

Strany 175 - ROTATIONS

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-21 Now select Advanced… Select the Paper Size (form siz

Strany 176 - Text & Extended Bars

Getting Started Chapter 3 3-22 428TM Operator’s Manual - 880042-0141 Press the Print Test Page and see a sample printout.

Strany 177 - 9.3 Code Pages

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-23 -i - vertically invert the image before printing -f<config

Strany 179 - 9.3.2 Danish Code Page

Getting Started Chapter 3 3-24 428TM Operator’s Manual - 880042-0141 -6 - error opening output file -8 - error opening output file - binary fo

Strany 180 - 9.3.3 860 Code Page

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-25 IF ERRORLEVEL -20 GOTO LabelN20 IF ERRORLEVEL -21 GOTO LabelN21 IF ERRORLEVEL

Strany 181 - 9.3.5 850 Code Page

Getting Started Chapter 3 3-26 428TM Operator’s Manual - 880042-0141 GOTO END :LabelN11 echo IMAGE COMPRESSIOM NOT SUPPORTED GOTO END :LabelN1

Strany 182

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-27 :LabelN42 echo POST-PRINT COMMAND STRING ERROR GOTO END :LabelN43 echo POST-P

Strany 183 - 9.3.6 German Code Page

Getting Started Chapter 3 3-28 428TM Operator’s Manual - 880042-0141 Figure 3-4 Loading Media 3.11 Print Button and S

Strany 184 - 9.3.7 865 Code Page

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-29 3.11.1 Print Button Operation Description Printing a label Press the Prin

Strany 185 - 9.3.9 852 Code Page

Getting Started Chapter 3 3-30 428TM Operator’s Manual - 880042-0141 3.12 Printer Modes The printer has four primary modes of operation. The

Strany 186

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-31 Solid AMBER A printed tag/label is waiting to be taken by the operator when

Strany 187 - 9.3.10 French Code Page

Getting Started Chapter 3 3-32 428TM Operator’s Manual - 880042-0141 Figure 3-6 Status Label (Examples) 3.13 Printer Integration When des

Strany 188 - 9.3.11 863 Code Page

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-33  The printer's user interface for status lights and also access to vie

Strany 189 - 9.3.13 437 Code Page

428TM Operator’s Manual - 880042-0141 i Table of Contents INTRODUCTION .

Strany 190

Getting Started Chapter 3 3-34 428TM Operator’s Manual - 880042-0141 3.13.3 Media Mounting Considerations The printer uses direct thermal med

Strany 191 - 9.3.14 Italian Code Page

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-35 3.13.5 Designing for Fan-Fold Media Fan-fold media must be handled correctly

Strany 192 - 9.3.15 British Code Page

Getting Started Chapter 3 3-36 428TM Operator’s Manual - 880042-0141 operation of the printer and media. The operator can become caught on cab

Strany 193 - 9.3.16 USA Code Page

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-37 Electrostatic discharges can cause damage to the print head, memory or electr

Strany 194 - Code Switching Chapter 9

Getting Started Chapter 3 3-38 428TM Operator’s Manual - 880042-0141 Figure 3-8 TOF (Top-Of-Form

Strany 195 - 10.1 Maintenance Schedule

Chapter 3 Getting Started 428TM Operator’s Manual - 880042-0141 3-39 3.15 Wristband Media Adapter Option When 1” wide wristband media is being us

Strany 196

Getting Started Chapter 3 3-40 428TM Operator’s Manual - 880042-0141

Strany 197 - 10.3 Internal Cleaning

428TM Operator’s Manual - 880042-0141 4-1 Chapter 4: Designing Labels Using LDS Label Design Software (LDS) refers to the control language res

Strany 198 - 10.4 Print Head Maintenance

Designing Labels Using LDS Chapter 4 4-2 428TM Operator’s Manual - 880042-0141 Figure 4-1 HyperTerminal™ Window Example

Strany 199 - The printhead dot row

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-3 information needed to define the different properties of the media b

Strany 200

ii 428TM Operator’s Manual - 880042-0141 3.13.4 Designing a Roll Support ...

Strany 201 - Hook detail that

Designing Labels Using LDS Chapter 4 4-4 428TM Operator’s Manual - 880042-0141 Microcom Corporation Thermal Printing Solutions 012345 T

Strany 202

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-5 While the maximum number of dots in the horizontal or “X” direction

Strany 203 - 11.1 Troubleshooting Tips

Designing Labels Using LDS Chapter 4 4-6 428TM Operator’s Manual - 880042-0141 means that a total of five format fields are to be generated.

Strany 204

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-7 PRINT SPEED DPS VALUE MM PER SECOND INCHES PER SECOND INCHES PER MIN

Strany 205 - General Index

Designing Labels Using LDS Chapter 4 4-8 428TM Operator’s Manual - 880042-0141 For example: Imagine a receipt format that contains 100 lines.

Strany 206

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-9 For media that has a LSY value less than the D2G parameter value in

Strany 207

Designing Labels Using LDS Chapter 4 4-10 428TM Operator’s Manual - 880042-0141 4.4.10 OFX (Offset X Direction) HFM, LSX, LSY, WEB, GAP, DPS

Strany 208 - 1-1, 3-2

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-11 4.6 Label Format Fields The Label Format Fields are used to define

Strany 209

Designing Labels Using LDS Chapter 4 4-12 428TM Operator’s Manual - 880042-0141 4.6.1 TSN (Text String Number) TSN, XB, YB, CC, TCI, CGN, F

Strany 210

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-13 TCI VALUE TCI DESCRIPTION 1 Regular Text (standard embedded font

Strany 211

428TM Operator’s Manual - 880042-0141 iii 4.8 Reverse Video ...

Strany 212

Designing Labels Using LDS Chapter 4 4-14 428TM Operator’s Manual - 880042-0141 4.6.6 CGN (Character Generator Number) TSN, XB, YB, CC, TCI,

Strany 213

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-15 Standard Downloadable Font Set CGN VALUE POINT SIZE FONT TYPE 10 6

Strany 214

Designing Labels Using LDS Chapter 4 4-16 428TM Operator’s Manual - 880042-0141 Standard Downloadable Font Set CGN VALUE POINT SIZE FONT TYPE

Strany 215 - Appendix

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-17 * These Symbols must use the CMX or CMY multipliers by 2 to produce

Strany 216

Designing Labels Using LDS Chapter 4 4-18 428TM Operator’s Manual - 880042-0141 4.6.9 CMX (Character Multiplier X Direction) TSN, XB, YB, CC

Strany 217

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-19 2 Fixed / Non-proportional Character Spacing 3 Fixed / No

Strany 218

Designing Labels Using LDS Chapter 4 4-20 428TM Operator’s Manual - 880042-0141 Figure 4-6 Label Format Line D

Strany 219

Chapter 4 Designing Labels with LDS 428TM Operator’s Manual - 880042-0141 4-21 CGN (Character Generator Number) This element is not used in line

Strany 220

Designing Labels Using LDS Chapter 4 4-22 428TM Operator’s Manual - 880042-0141 ^D57 6,1280,900,19,38,7,0,1,385,0,0 1,300,300,,6,,,,700,550,,,

Strany 221

428TM Operator’s Manual - 880042-0141 5-9 Chapter 5 Printer Commands The printer has a large and versatile collection of control commands to meet t

Strany 222

iv 428TM Operator’s Manual - 880042-0141 5.10 Dispensing Commands ...

Strany 223

Printer Commands Chapter 5 5-10 428TM Operator’s Manual - 880042-0141 ^C Print: Starts the print cycle or batch. This command is the equiva

Strany 224

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-11 config

Strany 225

Printer Commands Chapter 5 5-12 428TM Operator’s Manual - 880042-0141 Table 5-1 STL Status Responses Text Mode Response Byte Mode Response

Strany 226

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-13 >NO

Strany 227

Printer Commands Chapter 5 5-14 428TM Operator’s Manual - 880042-0141 0 = Accept Incoming Control Codes 4 Port #1 Parity Selection: Sets

Strany 228

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-15 4 Pr

Strany 229

Printer Commands Chapter 5 5-16 428TM Operator’s Manual - 880042-0141 3 Response After Print: If enabled, an enquiry response will be sent th

Strany 230

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-17 2 Ext

Strany 231

Printer Commands Chapter 5 5-18 428TM Operator’s Manual - 880042-0141 If this function is disabled, pressing the print button clears the error

Strany 232

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-19 8 Sta

Strany 233

428TM Operator’s Manual - 880042-0141 v 8.1.8 Modified Plessey (MSI 1),

Strany 234

Printer Commands Chapter 5 5-20 428TM Operator’s Manual - 880042-0141 1 = Enable >STOCK NOT LOADED< response 0 = Disable >STOCK NOT

Strany 235

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-21 d) Th

Strany 236

Printer Commands Chapter 5 5-22 428TM Operator’s Manual - 880042-0141 general inputs in the form of “>IO 0nH< where “n” is a hex number

Strany 237 - Glossary

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-23 Examp

Strany 238

Printer Commands Chapter 5 5-24 428TM Operator’s Manual - 880042-0141 8 = g/p output 4 - Format loaded All outputs are active high. 24.0 VDC =

Strany 239

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-25 5.2.1.

Strany 240

Printer Commands Chapter 5 5-26 428TM Operator’s Manual - 880042-0141 5.2.1.8 Software Switch #8 ^AB ^D COMMAND XX 28 Change SW8: Sof

Strany 241 - Appendix D: User Notes

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-27

Strany 242

Printer Commands Chapter 5 5-28 428TM Operator’s Manual - 880042-0141 7 Reflective Stock Out Detection: When this feature is enabled, the pr

Strany 243

Chapter 5 Printer Commands 428TM Operator’s Manual - 880042-0141 5-29 5.2.2.

Komentáře k této Příručce

Žádné komentáře