Microcom 405 Uživatelský manuál stáhnout pdf (Strana 3)

405 Addendum to 410 Operators Manual

1.3 SPECIAL STATUS LIGHT/TONE INFORMATION

The status light has different functions depending upon the mode of the printer. Table 1 shows

the relationship between the status light and the different modes.

Status Light/Tone

Light

Color

Tone Mode Meaning

Green None All On-Line and ready to print

Green Double tone

before print

All Battery is low, recharge the printer. At this

point the battery is at approximately 10% of its

capacity and can print less than 1000

additional linear inches.

Red None All Printer error:

Caused by a paper-out condition or a

hardware failure. If paper is out, follow

instructions in section 2.3, otherwise turn

printer off and back on. If condition persists,

contact your service representative.

Flashing

Red

Continuous

Tone

All The battery pack is too low for proper printer

operation. The unit will remain in this mode

until the battery is recharged or the printer is

powered off.

Yellow None Tag/tear,

Peel

Label present. Label is ready to be removed

from the printer mouth.

Flashing

Yellow

None Batch Printer is in standby mode and waiting for the

front panel button to be pressed.

Flashing

Yellow

None After

Paper-Out

Printer is waiting to continue processing. The

label button must be pushed twice to clear

yellow after loading.

Table 1

1 2 3

Komentáře k této Příručce

Žádné komentáře

Microcom 405 Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Tiskárny Microcom 405